On rebuilding my Mk 5 .. there are rubber mounts for the top of the rear springs in the GRP body .. but I can't recall finding any rubber packer at the base of the springs in the suspension arms.
Can anyone confirm that there shouldn't be any .. or should there?
Thanks.
Neil
Mk5 rear spring packer/insulator mount?
-
- Posts: 21
- Joined: Sun Jun 22, 2014 8:59 pm
- Location: Wirral
Re: Mk5 rear spring packer/insulator mount?
If you have an Imp set up this is how it is. Rubber insulator between spring top and body;, spring to bottom wishbone without rubber - the wishbone is insulated from the body by its rubber bushed.
-
- Posts: 21
- Joined: Sun Jun 22, 2014 8:59 pm
- Location: Wirral
Re: Mk5 rear spring packer/insulator mount?
Thanks sbs.. that makes sense from what I found!
cheers
Neil
cheers
Neil